Aluminum And Metal Base Pcb - manufacturer, factory, supplier from China

Hard gold fingers BGA complex PCB

• Supply Ability: 10000sqm/month

• Min. Order: 1 Piece/Pieces

• Certificate: ISO9001, ISO14001, UL, IATF16949

• Model No.: CW-330

Immersion gold finishing with hard gold gold fingers which is widely used in computers such as Memory module graphics card etc BGA design can save space and good for SMT A good laminate structure can control the characteristic impedance of the printed circuit board and the traces can form an easily controllable and...

Contact Now

Hard gold fingers BGA complex PCB

• Supply Ability: 10000sqm/month

• Min. Order: 1 Piece/Pieces

• Certificate: ISO9001, ISO14001, UL, IATF16949

• Model No.: CW-330

A good laminate structure can control the characteristic impedance of the printed circuit board and the traces can form an easily controllable and predictable transmission line structure called an impedance plate The characteristic impedance of the conductor on the printed circuit board is an important indicator of...

Contact Now

High pressure resistant aluminum base PCB

• Supply Ability: 10000sqm/month

• Min. Order: 1 Piece/Pieces

• Certificate: ISO9001, ISO14001, UL, IATF16949

• Model No.: CW-011

With the rapid development of emerging LED market the aluminum base PCB with good properties thermal and mechanical processing has been used widely partly for public facilities The road lamp and LED lighting products require high voltage testing in order that it can safely continue to work in the situation that the...

Contact Now

High frequency military industry communication PCB

• Supply Ability: 10000sqm/month

• Min. Order: 1 Piece/Pieces

• Certificate: ISO9001, ISO14001, UL, IATF16949

• Model No.: CW-306

High frequency board dielectric material has the following characteristics 1 It has the characteristics of small signal transmission loss short transmission delay time and small signal transmission distortion 2 has excellent dielectric properties mainly DK DF Moreover this dielectric property DK DF maintains its...

Contact Now

Round bulb lighting aluminum circuit board

• Supply Ability: 10000sqm/month

• Min. Order: 1 Piece/Pieces

• Certificate: ISO9001, ISO14001, UL, IATF16949

• Model No.: CW-006

According to the process the aluminum substrate can be divided into tin plated aluminum substrate anti alumina substrate silver plated aluminum substrate immersion gold aluminum substrate etc according to the application it can be divided into street lamp aluminum substrate fluorescent lamp aluminum substrate LB...

Contact Now

Bulb light LF HASL round Alumium PCB

• Supply Ability: 10000sqm/month

• Min. Order: 1 Piece/Pieces

• Certificate: ISO9001, ISO14001, UL, IATF16949

• Model No.: CW-004

LED bulb is the appearance of the bulb shape that people are used to the spherical shape and the internal light source is the LED chip Have the advantages of all LED lamps 1 energy saving environmental protection 2 long service life 3 no stroboscopic green The advantages is More energy efficient Long life Healthier...

Contact Now

Metal core IMS lighting circuit boards

• Supply Ability: 10000sqm/month

• Min. Order: 1 Piece/Pieces

• Certificate: ISO9001, ISO14001, UL, IATF16949

• Model No.: CW-013

Aluminum circuit boards are widely used in LED lighting industry as the good heat dissipation and energy saving LED light circuit boards always use white solder mask oil because of the good reflective Our aluminum circuit boards are made of highly reflective white oil which is 3 5 more reflective than ordinary white...

Contact Now

Yellow silkscreen thin switch PCB

• Supply Ability: 10000sqm/month

• Min. Order: 1 Piece/Pieces

• Certificate: ISO9001, ISO14001, UL, IATF16949

• Model No.: CW-120

Swith board need thin thickness because of the end products are not big As this one is different as normal PCB as the blue solder mask with yellow silkscreen Double Sided Boards have wiring on both sides To use the two sided wires it is necessary to have proper circuit connections between the two sides The bridge...

Contact Now

Car instrument lighting led pcb

• Supply Ability: 10000sqm/month

• Min. Order: 1 Piece/Pieces

• Certificate: ISO9001, ISO14001, UL, IATF16949

• Model No.: CW-048

A large number of SMT and BGA PCBs appear and customers should be led aluminum substrate manufacturers when mounting components to plug hole mainly because 1 Preventing short circuit of tin from the through hole through the component surface during over wave soldering of the LED aluminum substrate 2 Avoid flux...

Contact Now

Brake lighting led pcb

• Supply Ability: 10000sqm/month

• Min. Order: 1 Piece/Pieces

• Certificate: ISO9001, ISO14001, UL, IATF16949

• Model No.: CW-050

LED ligthing in car Aluminium material circuit boards to save energy and good heat dissipation With the development of electronic products in the direction of light thin short and small LED aluminum boards are also developing to high density and high difficulty A large number of SMT and BGA PCBs appear and customers...

Contact Now

Car Internal lighting led pcb

• Supply Ability: 10000sqm/month

• Min. Order: 1 Piece/Pieces

• Certificate: ISO9001, ISO14001, UL, IATF16949

• Model No.: CW-049

LED aluminum boards are developing to high density and high difficulty A large number of SMT and BGA PCBs appear and customers should be led aluminum substrate manufacturers when mounting components to plug hole mainly because 1 Preventing short circuit of tin from the through hole through the component surface during...

Contact Now

Blind and buried holes HDI circuit boards

• Supply Ability: 10000sqm/month

• Min. Order: 1 Piece/Pieces

• Certificate: ISO9001, ISO14001, UL, IATF16949

• Model No.: CW-279

With the development of portable product design in the direction of miniaturization and high density the difficulty of PCB design is becoming greater and greater placing higher requirements on the production process of PCB In most portable products the BGA package with a pitch of 0 65mm or less uses a blind buried via...

Contact Now

Advanced digital video camera pcb

• Supply Ability: 10000sqm/month

• Min. Order: 1 Piece/Pieces

• Certificate: ISO9001, ISO14001, UL, IATF16949

• Model No.: CW-317

For electrical requirements of high speed signals the circuit board must provide impedance control with AC characteristics high frequency transmission capability and reduction of unnecessary radiation EMI With the structure of Stripline and Microstrip multi layer design becomes a necessary design In order to reduce...

Contact Now

High Density Interconnector PCB

• Supply Ability: 10000sqm/month

• Min. Order: 1 Piece/Pieces

• Certificate: ISO9001, ISO14001, UL, IATF16949

• Model No.: CW-327

HDI circuit advantages Can reduce PCB cost When the density of the PCB increases by more than eight layers the cost will be lower than that of the traditional complicated lamination process Increased circuit density interconnection of traditional circuit boards and parts Conducive to the use of advanced construction...

Contact Now

POS motherboard HDI PCB

• Supply Ability: 10000sqm/month

• Min. Order: 1 Piece/Pieces

• Certificate: ISO9001, ISO14001, UL, IATF16949

• Model No.: CW-321

Holes with a diameter of less than 150um are called microvias in the industry Circuits made using this microhole geometry technology can improve the benefits of assembly space utilization and so on At the same time there are also miniaturization of electronic products HDI is the English abbreviation for High Density...

Contact Now

Small portable products HDI pcb

• Supply Ability: 10000sqm/month

• Min. Order: 1 Piece/Pieces

• Certificate: ISO9001, ISO14001, UL, IATF16949

• Model No.: CW-328

Continued growth in mobile phone output drives demand for HDI boards HDI is the English abbreviation for High Density Interconnector High density interconnect HDI manufacturing is one of the fastest growing areas in the printed circuit board industry From the first 32 bit computer from HP in 1985 to the large client...

Contact Now

Blind and buried holes HDI pcb

• Supply Ability: 10000sqm/month

• Min. Order: 1 Piece/Pieces

• Certificate: ISO9001, ISO14001, UL, IATF16949

• Model No.: CW-325

As 5G mobile phones become more integrated mobile phone motherboard upgrades are imperative The device usage in 5G mobile phones has increased significantly and the increase in integration has brought motherboard upgrades prompting the upgrade of ordinary HDI to Anylayer HDI and SLP Substrate LikePCB While electronic...

Contact Now

Light thin short small HDI PCB

• Supply Ability: 10000sqm/month

• Min. Order: 1 Piece/Pieces

• Certificate: ISO9001, ISO14001, UL, IATF16949

• Model No.: CW-324

The manufacturing method of the blind hole on the HDI circuit board includes the following steps coating the photosensitive epoxy resin baking the circuit board to cure the resin using the image transfer method to open the blind hole of the circuit board to remove the need to be blind The epoxy resin at the hole...

Contact Now

Communication module HDI PCB

• Supply Ability: 10000sqm/month

• Min. Order: 1 Piece/Pieces

• Certificate: ISO9001, ISO14001, UL, IATF16949

• Model No.: CW-322

As consumer demand for smaller more powerful electronic products continues to grow and electronic design engineers push the boundaries of technology HDIPCBs are becoming more and more popular PCB short for High Density Interconnected Printed Circuit Board can be manufactured with extreme precision using the skills of...

Contact Now

Advanced electronic digital products pcb

• Supply Ability: 10000sqm/month

• Min. Order: 1 Piece/Pieces

• Certificate: ISO9001, ISO14001, UL, IATF16949

• Model No.: CW-320

The common PCB sheet is mainly FR 4 which is made of epoxy resin and electronic grade glass cloth Generally conventional HDI uses adhesive backed copper foil on the outermost side Because laser drilling cannot penetrate glass cloth it is generally necessary to use adhesive free copper foil without glass fiber However...

Contact Now

IC carrier board pcb

• Supply Ability: 10000sqm/month

• Min. Order: 1 Piece/Pieces

• Certificate: ISO9001, ISO14001, UL, IATF16949

• Model No.: CW-318

Electronic products are constantly developing towards high density and high precision The so called high in addition to improving the performance of the machine must also reduce the size of the machine High density integration HDI technology enables smaller end product designs while meeting higher standards for...

Contact Now

Car information system products pcb

• Supply Ability: 10000sqm/month

• Min. Order: 1 Piece/Pieces

• Certificate: ISO9001, ISO14001, UL, IATF16949

• Model No.: CW-279

One type is automotive electronic control devices Automotive electronic control devices must be used in conjunction with on board mechanical systems so called electromechanical integration of automotive electronic devices they include engine chassis and body electronic controls For example electronic fuel injection...

Contact Now

Navigation System products pcb

• Supply Ability: 10000sqm/month

• Min. Order: 1 Piece/Pieces

• Certificate: ISO9001, ISO14001, UL, IATF16949

• Model No.: CW-280

Car electronics audio car entertainment system GPS car DVD anti theft device mirror camera headrest display car CD car MP3 player car power supply car charging stand car heating seat cushion car massage seat Car massage cushion car navigation system driving recorder car audio horn car universal charger electronic eye...

Contact Now

Machine vision sensor products pcb

• Supply Ability: 10000sqm/month

• Min. Order: 1 Piece/Pieces

• Certificate: ISO9001, ISO14001, UL, IATF16949

• Model No.: CW-276

Industrial control working principle For example the power control of air switches when the power of electrical appliances is too large the internal mechanical principle starts to cause the switch to automatically open thereby ensuring the safe use of electricity in industry or buildings and accurately finding short...

Contact Now